| Channel |
1 |
| Controlled Slew Rate |
YES |
| Enable Logic |
Active High |
| Output Discharge |
YES |
| Reverse Current Block |
NO |
| TR (μs) |
165 |
| Max Continuous Current (A) |
1.5 |
| Ron (mΩ) |
66 |
| Power Supply (Min) (V) |
1.2 |
| Power Supply (Max) (V) |
5.5 |
| Temperature |
-40℃~85℃ |
| IO Level (V) |
1.8 |
| Package (mm) |
FCDFN 1X1-4L |
Integrated P-channel MOSFET load switch
Input voltage: 1.2V to 5.5V
1.5A maximum continuous switch current
Switch on-resistance(typ.):
Rdson=52mΩ at VIN=5.5V
Rdson=58mΩ at VIN=4.2V
Rdson=66mΩ at VIN=3.3V
Rdson=80mΩ at VIN=2.5V
Rdson=110mΩ at VIN=1.8V
Rdson=222mΩ at VIN=1.2V
Controlled slew rate to limit inrush currents
Internal EN Pull-Down Resistor on AW35122
Quick output discharge
FCDFN 1mm×1mm×0.55mm-4L package
The AW3512/AW35122 is a load switch with output slew rate control. The device integrates a 66mΩ (typ.) P-channel MOSFET, which can operate over a wide input range of 1.2V to 5.5V.
The AW3512/AW35122 features output slew rate control, limiting inrush currents during turn-on to protect downstream devices.
DEVICE COMPARISON TABLE
