中文
Home
>Products
>Power management
>Breathing LED drivers
>Matrix breathing LED drivers

AW20144SQNR

18×8 MATRIX LED DRIVER WITH AUTO BREATH

Datasheet :
Preview - AW20144SQNR - Datasheet

Product details

Global Current Level 256
Current Levels for Color-Mixing 256
Channel 144
Current Levels for Dimming 256
Charging Indicator NO
Control Interface SPI
Power Supply (Max) (V) 5.5
Global Max Current(mA) 120
IO Level (V) 1.8
Audio Sync. NO
Power Supply (Min) (V) 2.7
Auto Breath YES
Temperature -40℃~85℃
Topology Matrix
Package (mm) QFN 5X5-40L
QFN 5X5-40L
•18 current sinks, 8 current switches, up to drive 144 LEDs or 48 RGBs.
•Programmable matrix size
•3 pattern controllers for auto breathing or group PWM control
•Global 256-level DC current configuration
•Individual 256-level PWM for dimming
•Individual 256-level scaling current for color-mixing
•High-precision current sinks
■Device-to-device error: ±5%
■Channel-to-channel error: ±5%
•EMI and audible noise reduction
■Phase control
■Spread spectrum function
■Programmable slew rate control
•Individual 144 LEDs open/short detection
•Multiple-device clock synchronization by SYNC pin
•UVLO and over-temperature protection
•De-Ghost
•10MHz SPI interface
•Power supply: 2.7V~5.5V
•QFN 5mmx5mmx0.55mm-40L package
AW20144S is an 18x8 matrix LED driver programmed via an SPI compatible interface. Each channel has individual 8-bit DC current setting for color-mixing and 8-bit PWM current setting for brightness control. The global current of each channel is configured via register GCCR and external resistor REXT. Three integrated pattern controllers provide auto breathing or group dimming control. Each pattern controller can work in auto breathing or manual control mode. All breathing parameters are configurable, including rising/falling slope, on/off time, repeat times, and minimum/maximum brightness, etc. Each LED’s PWM parameter can be sourced from any one of the 3 pattern controllers optionally. Phase-delay, phase-inverting, selectable three phase, spread spectrum and slew rate control technology are utilized to reduce EMI and audible noise caused by MLCC when LEDs turn on or off simultaneously. AW20144S can be turned off with minimum current consumption by either pulling the EN pin low or using the software reset. AW20144S is available in QFN 5mmx5mmx 0.55mm-40L package. It operates from 2.7V to 5.5V over the temperature range of -40°C to +85°C.

Technical documentation
Type
Title
Date
Product Design Guide AW20144S Software Design Guide   2023-05-11
Datasheet DS_AW20144S_EN_V1.6_18x8 MATRIX LED DRIVER WITH AUTO BREATH   2023-06-06
Product Design Guide AW20144X_AW20198X_AW20216X Hardware Design Guide   2023-12-08

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

Evaluation board

AW20144&20198 EVB V1.1 —

AW20144X_AW20198X Demo是一款18*8或18*11的LED驱动Demo, Demo包含了MCU和LED 驱动电路。

View options
Software development

DRIVER OR LIBRARY

AW20144S_Driver — Android Driver for AW20144S。

AW20144S Driver，includeing sample code,porting guide,debugging guide etc.

View options

APPLICATION SOFTWARE&FRAMEWORK

AW20144_AW20198_AW20216_GUI — Intelligent RGB LED driver Tunning Tools of AW20XXX series

AW20XXX GUI is a highly integrated and easy-to-use tool for product configuration and debugging.Intuitive interface and user-friendly operation can help custion can help customers shorten development cycle and complete system integration quickly

View options

DRIVER OR LIBRARY

AW20144S_Driver_MCU — MCU Driver for AW20144S

AW20144S Driver,includeing sample code,porting guide,debugging guide etc

View options
Hardware development

Evaluation board

AW20144&20198 EVB V1.1 — 使用于AW20144X 和AW20198X 所有矩阵式呼吸灯芯片的EVB评估主板

View options
Software development

DRIVER OR LIBRARY

AW20144S_Driver — Android Driver for AW20144S。

AW20144S Driver，includeing sample code,porting guide,debugging guide etc.

View options

APPLICATION SOFTWARE&FRAMEWORK

AW20144_AW20198_AW20216_GUI — Intelligent RGB LED driver Tunning Tools of AW20XXX series

AW20XXX GUI is a highly integrated and easy-to-use tool for product configuration and debugging.Intuitive interface and user-friendly operation can help custion can help customers shorten development cycle and complete system integration quickly

View options

DRIVER OR LIBRARY

AW20144S_Driver_MCU — MCU Driver for AW20144S

AW20144S Driver,includeing sample code,porting guide,debugging guide etc

View options