AW35615CSR

AW35615 Programmable USB Type-C PD Controller

产品手册 :

产品详细信息

DC_CC(V)	28
PD Specification	3.0
DC_VBUS(V)	28
Power Role	DRP SRC SNK
IO Level (V)	1.8 3.3
Package (mm)	WLCSP 1.40X1.36-9B

WLCSP 1.40X1.36-9B

⚫ Dual-role functionality with autonomous DRP
toggle
⚫ Attach/Detach detection as either a host or a
device based on what has been attached
⚫ Operate as dedicated host, dedicated device or
DRP by host software configuration
⚫ Support USB-PD 3.0 SPR Mode and 28V of 3.1
ERP Mode
⚫ USB PD 3.0 certified (TID #8339)
⚫ Integrate the several functionality of the CC Pins
according to Type-C 1.2
⚫ Integrate VCONN switch with configurable OCP
and OTP
⚫ VBUS detection and discharge control
⚫ Dead Battery Support (SNK mode support when
no power applied)
⚫ Higher withstand voltage value of CC Pins: 28V
⚫ Support wake detection avoids CC voltage toggle
to prevent electric corrosion
⚫ BIST mode supported
⚫ Disable Mode Current is only 0.37μA
⚫ WLCSP 1.40 mm × 1.36 mm-9B package

The AW35615 is a programmable DRP/SRC/SNK USB Type-C controller that compiles with USB PD3.0 and Type-C 1.2 specifications, and it integrates a complete Type-C transceiver including the pull-up and pull-down resistors.

The AW35615 enables the USB Type-C detection including attach and orientation by autonomous DRP toggle. The CC logic block monitors the CC1/CC2 pin for pull-up in pull-down resistances to determine when a USB port has been attached, the orientation of the cable and the role detected. Furthermore, AW35615 supports wake detection without CC voltage toggle, which brings lower power and avoids electric corrosion due to voltage toggle.

The AW35615 integrates the physical layer of the USB BMC Power Delivery protocol to allow up to 100W of power and role swap. The BMC PD block enables full support for alternative interfaces of the Type-C specification.

The AW35615 supports VBUS voltage detection and discharge control by the discharge resistance integrated in VBUS channel. The withstand voltage value of CC pins is up to 24V.

技术文档

类型	项目标题	语言	日期
产品设计指南	AW35615 硬件设计指南	中文	2023-05-10
产品用户指南	AW35615 EVB User's Guide	英文	2023-11-01
产品手册	DS_AW35615_EN_V1.6	英文	2024-01-18

设计和开发

如需其他信息或资源，请查看下方列表，点击标题即可进入详情页面。

软件开发

驱动程序或库

AW35615_Driver_Qcom_v1.4.0 — aw35615系列qcom平台Android驱动

aw35615系列qcom平台Android驱动，包含了示例代码、移植文档、dtsi

了解详情

驱动程序或库

AW35615_Driver_MTK_v1.6.0 — aw35615系列mtk平台Android驱动

aw35615系列mtk平台Android驱动，包含了示例代码、移植文档、dtsi

了解详情

应用软件和框架

AW35615_GUI — AW35615产品调试工具

AW35615 GUI是高度集成的工具，用于产品的配置和调试过程。直观的界面和人性化的操作，可以帮助客户缩短开发周期，快速的完成系统集成

了解详情

驱动程序或库

AW35615_Driver_MCU_v1.0.0 — aw35615系列mcu平台驱动

aw35615系列mcu平台驱动，包含了示例代码、移植文档

了解详情

软件开发

驱动程序或库

AW35615_Driver_Qcom_v1.4.0 — aw35615系列qcom平台Android驱动

aw35615系列qcom平台Android驱动，包含了示例代码、移植文档、dtsi

了解详情

驱动程序或库

AW35615_Driver_MTK_v1.6.0 — aw35615系列mtk平台Android驱动

aw35615系列mtk平台Android驱动，包含了示例代码、移植文档、dtsi

了解详情

应用软件和框架

AW35615_GUI — AW35615产品调试工具

AW35615 GUI是高度集成的工具，用于产品的配置和调试过程。直观的界面和人性化的操作，可以帮助客户缩短开发周期，快速的完成系统集成

了解详情

驱动程序或库

AW35615_Driver_MCU_v1.0.0 — aw35615系列mcu平台驱动

aw35615系列mcu平台驱动，包含了示例代码、移植文档

了解详情