| Channel |
1 |
| Controlled Slew Rate |
YES |
| Enable Logic |
Active Low |
| Output Discharge |
YES |
| Reverse Current Block |
NO |
| TR (μs) |
274 |
| Max Continuous Current (A) |
1.5 |
| Ron (mΩ) |
64 |
| Power Supply (Min) (V) |
1.2 |
| Power Supply (Max) (V) |
5.5 |
| Temperature |
-40℃~85℃ |
| IO Level (V) |
1.8 |
| Package (mm) |
FCDFN 0.8X0.8-4L |
• Integrated P-channel MOSFET load switch
• Input voltage: 1.2V to 5.5V
• 1.5A maximum continuous switch current
• Switch on-resistance(typ.):
Rdson=52mΩ at VIN=5.5V
Rdson=57mΩ at VIN=4.2V
Rdson=64mΩ at VIN=3.3V
Rdson=76mΩ at VIN=2.5V
Rdson=100mΩ at VIN=1.8V
Rdson=164mΩ at VIN=1.2V
• Controlled slew rate to limit inrush currents
• Ultra low shutdown current
• Quick Output Discharge(QOD)
• Internal EN pull-up resistor
• FCDFN 0.8mm*0.8mm*0.55mm -4L package
The AW35114 is a load switch with output slew rate control. The device integrates a 64mΩ (typ.) P-channel MOSFET, which can operate over a wide input range of 1.2V to 5.5V.
The AW35114 features output slew rate control, limiting inrush currents during turn-on to protect downstream devices. In addition, AW35114 has QOD function which can prevent the output from floating when the switch is disabled.
