| Charger Type |
Linear Charger |
| Number of series cells |
1 |
| Power Supply (Min) (V) |
4 |
| Power Supply (Max) (V) |
5.5 |
| Charge Current (Min) (mA) |
2 |
| Charge Current (Max) (mA) |
512 |
| VOREG |
Programmable |
| VOREG (Min) (V) |
3.6 |
| VOREG (Max) (V) |
4.545 |
| Control Interface |
IIC |
| Operation Mode |
Host Control |
| IO Logic Level (V) |
1.8 |
| Temperature |
-40℃~85℃ |
| Special Function |
NTC |
| Package (mm) |
WLCSP 1.68X1.68-9B |
Charge Voltage Regulation Accuracy:
±0.5% ( 0°C to 50°C )
Charge Current Accuracy: ±5%
Maximum 28V Input Voltage Rating with Over-Voltage Protection
Minimum -5V Input Voltage Protection
Complete Charge Process with Pre-Charge, Fast Charge and Constant Voltage Regulation
Programmable Charge Parameters Through I2C Compatible Interface
Programmable Charge Termination and Autonomous Recharge
Wide Range of Fast Charge Current: 2mA~500mA
Strong and Robust Protection: VIN OVP, Battery OVP, OCP, Reverse Leakage Protection, Short Protection, Thermal Protection, PCB Over Temperature Protection
BATFET Control to Support Shipping Mode
System Reset Function
Fully Integrated Power Path Management
Ultra-low Battery Leakage Current to Support Shipping Mode
WLCSP 1.68mm×1.68mm×0.63mm-9B, 0.5mm Pitch Package
7-bit slave address (A7~A1) is 1001001 binary(0x49H)
IEC62368-1 Approved-File No.BE-37454
The AW32001E is a highly-integrated Li-Ion/Li-Polymer battery linear charger with system power path management. The charge process of AW32001E includes: Pre-Charge, Fast Charge and Constant Voltage Regulation. The charge parameters and operating modes are programmable through I2C interface. The charge process runs automatically and recharging occurs when the battery voltage drops below VBAT_REG-VRCH after the charge done status.
